Category: Windows 7

After reading this guide you will be able to increase the performance of your Windows based computer system. This post will help you do some basic tasks that will help you get rid of the performance degradation that you might be facing. Overtime & because of a numbers of reasons your computer might get slow, some of the reasons include:

• Wrong Power Plan choice
• Improper driver software
• Multiple Antivirus software
• No Antivirus Software ( Computer is infected )
• Memory issues ( Not enough RAM )
• Multiple programs starting when Windows Start
• Heavy visual effects like transparency etc..

First of all, there is a Microsoft Fix It Solution available to solve a few software based problems that might be degrading your computer’s performance. Click on the image below to follow link:

Now Comes the manual Fixing Solutions:

• Using Proper Drivers

• Go to start menu
• In the start menu search box type Windows Update
• Click on the Windows update link
• click of Check for updates
• Select the hardware device driver updates from within the Optional Updates section
• OR
• Go to your Computer /Motherboard /Graphic Card manufacturer’s website
• Download and Install all the latest drivers
• Two of the most important drivers are Chipset & Display drivers
• Power Plan

• Go to Start Menu
• In the start menu search box type Power Options
• Make sure you are using balanced power plan for proper battery & performance.
• Go get High Performance, select High Performance power plan ( Not recommended, if you want better battery life)
• Start up Items

• Go to Run ( Windows key + R )
• Type MSCONFIG
• Go to Start up tab on top
• uncheck the checkboxes of programs that you do not want when windows start

• Make Sure you do not uncheck something that is important and you want your computer starting that program at start up ( Example : Graphics Driver software )
• Read the programs description & path to make sure you deselect only unwanted programs
• Not Enough RAM / Faulty RAM

• In Windows 7 there is a built-in tool to check your Memory modules ( RAM ) for errors.

• Go to start menu & type Windows Memory Diagnostics
• To Run the program then click on run now ( System will restart )
• OR
• you can schedule it to run at a later time
• Windows XP  does not have such a tool. SO Replacing a Memory Module for testing is the only option. ( I do not recommend third party memory diagnostic program, though you can use them too )
• If you think your computer has less RAM to work with, you can always think of Upgrades.

After Reading this post you will be able to fix a number of small issues that you might be facing with your installation of Windows. This post includes solution for Windows 7, Vista & XP. Microsoft Fix It Solution link inside.

Some of the issues that this guide helps you to fix are :

• You cannot empty the Recycle Bin or delete a file or a folder inside the Recycle Bin.
• When you try to rename or move a file, you receive the following error message: “The file or folder does not exist.”
• When you copy, move, rename, or delete a file on a network share, you receive the following error message: “There is a network or file permission error. The network connection may be lost” or “The folder does not exist. The file may have been moved or deleted. Do you want to create it?”
• Your View settings or customizations for one or more folders may be lost or incorrect.
• You cannot use keyboard shortcuts to select more than one item in Windows Explorer, or you cannot select multiple items in a Windows Explorer window by holding the SHIFT key or the CTRL key while you click the items.
• Some icons in My Computer, in Windows Explorer, on the desktop, or on the Quick Launch Bar change randomly.

Windows XP

• Insert The Windows XP Disc into the CD/DVD drive
• Go to Run ( Start menu ) or ( Winkey + R )
• type SFC /SCANNOW
• This process will check your system files for problems and will fix them automatically.

Windows Vista / 7

• Go to Run ( Winkey + R )
• Type SFC /SCANNOW
• Wait for the process to complete
• Restart your computer

Microsoft FIX IT

Click above to go to the Microsoft FIX it site and run the tool

After reading this post you will be able to solve / fix “ USB Device not recognized “ error message that is displayed on your Windows Computer system. Windows 7 & VISTA Hotfix link inside. Microsoft FIXIT for Windows XP ( Link Inside )

There are quite a few causes for this problem to occur. Following are some of the resolutions that we have come across while troubleshooting Windows over time. These solutions are applicable on Windows 7, XP & Vista.

Uninstall & Reinstall USB Root Hub

• Go to device manager ( Control Panel ), Windows 7 users can type device manager in the start menu search box & open the proper program from the results displayed.

• Expand Universal Serial Bus controller options
• Right click on USB root hub ( one at a time ) & click uninstall.
• Remember if you are using a USB keyboard/mouse or any devices that use USB interface might stop working.
• Restart your computer.

If the problem persists

• Turn off Power Management in Windows

• Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
• Expand Universal Serial Bus controllers.
• Right-click a USB Root Hub in the list, and then click Properties. The USB Root Hub Properties dialog box is displayed.
• Click the Power Management tab.
• Click to clear the Allow the computer to turn off this device to save power check box, and then click OK.
• Repeat steps with all USB Root hubs available.

If the problem persists

• Go to, your computer/motherboard manufacturer’s support website & from there download and install latest chipset drivers from there.
• Install these drivers & restart your computer

If the problem persists

• Go to, Windows Update ( Control Panel )
• Update your Windows with all recommended updates & check if there are any hardware device drivers within optional updates, Install them as well.

Windows 7 & Vista Users HOTFIX

• http://support.microsoft.com/kb/976972

FIXIT for Windows XP users

• http://go.microsoft.com/?linkid=9740816

The Last Step for Laptops ( All Portable Devices with removable battery/ Desktops

Portables:

• Turn off your Computer
• Take the battery out carefully, refer the documentation that came with your computer.
• Press & hold the power button for a few seconds.
• Put the battery back into the compartment
• Start the computer and check

Desktops:

• Turn off your computer
• Pull out the power cord from the mains or backup unit ( UPS )
• Maintain no power policy for 2 minutes
• Restore power to the computer unit
• Start your computer to check.

After reading this article you will be able to solve the problem where corruption occurs on your screen or you see lines across your computer display. This problem might occur due to a Display driver problem, a display hardware error, Display connection cable problem or even a faulty display. If it’s a laptop & lines occur when you move your screen ( hinges move ), it could very well be the display cable problem connecting your motherboard/display adapter to your screen.

Follow these steps to resolve the issue:

• Go to, control panel & locate programs & features or simply type Uninstall a program.
• From the list therein, locate the display driver with the help of the example screen shot given below:

OR

• Apart from the above examples, you can have a nVidia Display adapter as well. Select the appropriate program from the list following the screenshots above and click on uninstall.
• Restart your computer
• Now, Go to the Support website of either your computer manufacturer/Motherboard manufacturer or if you have a add-on Display adapter ( Graphics Card ), go to the Gfx Card Manufacturers support website.
  Example: http://support.intel.com or http://support.asus.com etc.
• OR , to get latest drivers you can use WINDOWS UPDATE
• To run Windows Update, Go to start menu & in the start menu search box, type Windows Update & press Enter.

• Refer the above screenshot, you can either press Check for updates on the Top left hand corner or directly click on optional updates to check if new hardware drivers are available for your computer system.

If This does not solve your issue,

For Desktop Computer Systems

• If you have a Add-on Graphics Adapter Installed, try pulling it out and checking the display on your on-board display option. If you do not have a motherboard with a on-board display, get another card to check if that works or try reseating your present graphics adapter properly into the slot.
• Check the Display Cable ( Any type ) for damage. Also check both ends of the cable to make sure they are properly plugged in.
• Check your Display Monitor with another computer of laptop device to make sure you don’t have a problem with your Display.
• You can alternatively try to plug another monitor into your computer to check if that works properly.

For Laptop ( All portable Computers )

• Take out your laptop battery, press & hold your power button for a few seconds.
• Reinsert the battery into the compartment & check if the problem persists.
• If your laptop shows lines across the screen when you move the display panel ( move the hinges to adjust the display ) then your cable connecting your display to motherboard/display adapter might be wearing out, in this case the only recommended solution is to take the computer to a authorized dealership or support outlet.

POWER PROBLEMS

• Your Computer monitor might display some lines across the screen if there is a power surge or when the power input is lower or higher than the recommended range your monitor supports (Most of the time LOWER ), Check the documentation that came with your monitor to confirm the recommended power input.

After reading this post you will be able to fix the problem where you give a print command & it gets stuck in the print queue & all the documents fail to print. When you try to cancel the print job or delete documents from the print queue, the documents/print job doesn’t get cancelled.

Try the following to resolve the problem

• Go to Control Panel ( Found in start menu )
• Go to Devices and Printers
• Double Click the Printer Name
• Within the print queue press Cancel All or Right Click a particular document and click cancel/delete

If this doesn’t solve it, try this:

• Check if you printer has a Cancel or STOP button, Press it ( Refer your Printer documentation for using STOP/Cancel Button )
• Turn your printer OFF, If it’s a USB device, try plugging your printer into another USB port. Then Turn it ON

If this doesn’t solve it, try this:

• Open Notepad & carefully select all the following text:
• net stop spooler
  del %systemroot%\system32\spool\printers\*.shd
  del %systemroot%\system32\spool\printers\*.spl
  net start spooler
• Right-click the text that you selected, and then click Copy.
• In Notepad, right-click in the blank document, and then click Paste.
• Carefully select (highlight) all the following text:C:\DeletePrintJobs.cmd
• Right-click the text that you selected, and then click Copy.
• In Notepad, click Save As on the File menu.
• In the File Name box, right-click, and then click Paste.
• Click Save.
• Go to Start menu & in the start menu search box type CMD ( Right Click, Run as administrator )
• type C:\DeletePrintJobs.cmd

This will delete your printer spooler. Try this only if you are confident to do this opration. Use the comment section below to ask if anything is not clear enough.

Last Method:

• Go to, Control Panel
• Program & Features
• Uninstall a Program
• Locate your Printer Driver/Software
• Click on Uninstall.
• Restart your computer
• Either Insert the disc that came with your printer or download and install the latest drivers from your printer manufacturers website.
• Check if you problem is resolved.

This guide can be used for resolving the STOP error with the keywords “kernel_data_inpage_error”. Here we have listed a few ways to resolve these type of Blue screen errors. After troubleshooting kernel data inpage error a few times, it seems like the cause of this error resides in memory. In these cases memory refers to both RAM and Hard disk drive in your system. It’s not at all necessary that your hardware has a problem, though it’s a possibility. This error might also occur due to a faulty driver software. To get to a conclusion whether you have a software or hardware error, that is causing this BSOD, try the following:

Below is an example of the error you might be getting:

Stop 0x0000007a ( XXXX XXXX XXXX )
filename.sys – Address XXXXX

• Use Windows Update to update your computer & drivers ( install all recommended and optional updates) ( optional updates most of the time have your device drivers )
• If you don’t find new drivers on Windows update, go to your motherboard / Computer Manufacturer’s support site, Select your model / version –> download the Chipset , Display & communications / networking drivers and Install them.
• Restart & check
• If the problem still persists,
• Go to Start menu and type CMD
• Right click the Command (CMD) program that appeared in your start menu search results and click on run as administrator
• now, type CHKDSK /p  & press enter.
• After the scan is complete,
• type, CHKDSK C: /f /r    (This will repair corrupted sectors )
• Restart the system and check if the problem is solved.

If not,

• Follow this guide to check for Memory ( RAM errors ) CLICK HERE

If, problems are found, replace your RAM modules, if you have multiple modules try taking all of them out and then test with one module at a time and check for errors. repeat the step with all modules.

Last Step

System Restore : Click here for the Guide to using System Restore

After reading this post you will be able to fix some the problems with your printer or many sorts of problems that are producing  errors when your try to print a document in Windows.

Some of these problems involve :

• You are unable to install a printer, connect to a printer, or print more than one job at a time
• You receive an error indicating your Print Spooler service is experiencing problems
• You receive an error indicating your <PRINTERNAME> is not the default printer
• You receive an error indicating: <PRINTERNAME> cannot be contacted over the network
• You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem
• You cannot Print in Internet Explorer (CLICK HERE)
• Your printer shows as offline, even when it is turned on.

A few things to check :

• If your printer is connected locally ( directly to your computer & not on a network), try checking the connection between your Printer & computer and make sure it’s not loose.
• Check the cable connecting your printer and computer. Change if necessary, always keep a spare, change just to make sure the cable isn’t bad.
• Follow the Printer Manual to make sure any error signal lights indicating a problem with printer are not lit. If they are check for problem associated with that light in the documentation that came with your printer.
• Check for paper Jam/low cartridge.
• If your printer is connected over a network, make sure your network is up and running. ( check Router/Access Point )
• If you are using a print server to connect to the printer over a network, make sure the print server is working fine.
• If the printer is attached to another computer over the network and then shared for users on a network, make sure the printer is printing directly on the system it is attached locally to.
• Refer your documentation & press the printer demo print button to make sure that the printer hardware is working fine.
• Make sure there are no print command in print queue that might be hanging the print jobs. To check, go to start menu –> Devices and printers –> double click your printer and check the print queue.
• If you cannot print from Internet Explorer follow this guide, Click Here

Else,

Microsoft Fix IT