Categories
Windows 8

How to disable automatic system restart on system failure in windows 8, 7, vista, XP

This post will help you disable Automatic Restart on System Failure in Windows 8, 7, Vista & XP. Whenever a critical error is detected in Windows ( here critical error is referred to STOP errors or better known as BSOD) , your Windows PC restarts itself to prevent any further damage to your computer. It is a safety measure integrated into Windows. But, in order to solve this error we need to know the Error code and information associated with the error. This information is displayed when you turn off Automatic Restart on System Failure.

Below are the steps to disable Automatic Restart on system failure in Windows 8 ( applies to : 8 , 7 , Vista , XP )

  • On the start screen ( start menu in 7 )
  • Type System
  • Click on the link displayed
  • Now from the List of links in the left pane
  • Click on Advanced System Settings

restart

  • Now, Click on Settings in Startup & recovery section

restart2

  • Uncheck the checkbox that says Automatically Restart
  • Click on OK
  • Click on Apply ,  OK

Now the next time your computer crashes, it won’t restart, but will show you a screen with error code and some information associated with the error. Note down this information.

Categories
Windows 10 Windows 8

Fix : Clock watchdog timeout stop / blue-screen error in Windows 10 | 8 |8.1

After reading this post you will be able to fix a STOP error or better known as BSOD ( Blue screen error ) in Windows 8. The error code is something like Clock Watchdog timeout. Below is the screenshot of this error:

WP_000142

The image above is for reference only.

Note: FOR SSD users : Make sure you are running latest AHCI Drivers & AHCI in BIOS. Also if the problem persists, secure erase your SSD and install Windows 8.

UPDATE: Windows 10 users

If you are facing this error, make sure your Windows is updated & if a BIOS update for Laptop or Desktop PC motherboard is available, update it. Remember BIOS update must be done on your own risk, if done incorrectly, it can make your PC unusable. Refer your system documentation and seek your system /motherboard manufacturer’s support on this.

Fix for Windows 10 – If you are using UEFI (Unified Extensible Firmware Interface), Rebuild your BCD as suggest in this post – Click here

Fix:

Step 1

  • Use Windows update to download and install all the necessary updates for your windows PC
  • To use Windows update, just start typing windows update on the start screen & choose windows update from the results displayed

Step 2

  • Go to your system or motherboard manufacturers support website
  • Download the latest SATA / AHCI drivers
  • Make sure the downloaded drivers are for Windows 8
  • Also, download and install the latest chipset drivers

Step 3

  • Go to run ( windows key + R )
  • type SFC /SCANNOW
  • let the process run and finish
  • Restart your computer

Step 4

  • Remove any USB storage devices attached to your computer
  • If this computer is a desktop make sure your hard disk drive is seated properly
  • also make sure that the hard disk data & power cables are connected properly

Step 5

  • Go to your BIOS by pressing the key ( refer the documentation that came with your computer / motherboard ( usually it’s DEL , F10 , F2 )
  • Locate a setting called AHCI or SATA mode
  • make sure it’s set to AHCI or BOTH

This should solve your problem, if not use the comment section to notify me.