Categories
Windows 8 Windows 8.1

Fix: Diagnostics Policy Service not running in Windows 8 | 8.1

This post helps you solve an issue with your windows 8 | 8.1 PC, where, The diagnostics policy service is not running. There could be a few causes of this problem. Some of them include a device driver issue that’s stopping the service due to a conflict. A malware or other issues relating to a system service corruption.

Here are a few steps that can help you fix this issue:

Method 1

  • Press Windows logo key + X (to open the power command menu )
  • policy3
  • Now, Click on Device Manager
  • Here, locate Network Adapters, Right Click your network adapter
  • Click on Update Driver software
  • policy5
  • Alternatively, you can download and install the updated version of your network adapter’s driver software from your motherboard / computer manufacturer’s support website
  • Restart your computer & check if the problem is solved.

 

Method 2 : Starting the Diagnostics policy service

  • Press Windows logo key + R
  • Type services.msc
  • Locate the service Diagnostic Policy Service
  • policy1
  • Right Click the service
  • Click on Properties
  • policy2
  • Now, here, make sure that the service is started,
  • if not, start it
  • & set the startup type to Automatic
  • Apply , OK
  • Check if the problem is solved.

 

Method 3: Using the Windows Network Diagnostic

  • Right Click the network icon on taskbar
  • Click on Troubleshoot Problems
  • policy4
  • Policy
  • After the process completes,
  • Click on Try these repairs as an administrator
  • Check  if this solves your problem.

Method 4 : Command line

  • Press Windows logo key + X ( power menu )
  • Click on Command Prompt (Admin )
  • Now, type
  • net localgroup Administrators /add networkservice
  • Press Enter
  • Now, Again type,
  • net localgroup Administrators /add localservice
  • Press Enter
  • You will get a message saying “ Command completed successfully”
  • Exit the command prompt & check if this solves your problem

 

Hope this helps, You can drop in a line in the comments section below, if you have any suggestions or feedback.

Categories
Misc Windows 7 Windows 8 Windows Vista Windows XP

Block Internet Access over Network but allow Network Access / File & Print Sharing in Windows 8 , 7 , Vista , XP

After reading this guide you will be able to block internet access over a home network or any network that your are an administrator to. This guide is a very simple collection of steps that do not require any additional software or firewall support to block internet access & just allow file & printer sharing.

There are situations where one needs to allow or block internet usage to some users over a network. There are different methods that can be used to do the same, though the most easy method is given below:

Let’s assume that you have a network running with single or multiple routers, either in home or office & you wish to block just the internet access to specific and / or all users. For this you have to login to your router by either IP address or router address & provide your username & password therein. Now in DHCP or DNS setting just uncheck the automatic DNS & mention the DNS settings to be anything you wish. for example: 192.168.1.15 or anything you like except the router’s IP address. 

Now all the computer systems over your network might still show the internet to be connected but will not resolve / open any websites.

To enable network access in a specific computer, just go the properties of the network adapter of that specific computer & within the IP address menu mention any open DNS. i.e 208.67.222.222 208.67.220.220 or Google DNS would also do.

DNS

And that is all there is to it.